
JTAG-Booster for Intel StrongARM SA-11x0
?
?
?
?
?
18
There is no Intel StrongARM SA-11x0 in the JTAG chain
No Intel StrongARM SA-11x0 was found in the JTAG chain. Check the target
power. Try with option /DRIVER=4 again.
Value of option /FILE-OFFSET out of range
The value of the option /FILE-OFFSET= points behind end of file.
wrong driver #
The value specified with the option /DRIVER= is out of range.
wrong Identifier (xxxx)
No valid identifier found. Check the specified chip select signal and the bus
width. Try with the option /DEVICE= .
Wrong length of boundary scan register. Should be 279 for a Intel
StrongARM SA-1100. (Should be 292 for a Intel StrongARM SA-1110.)
The length of the boundary scan register of the selected part (if there are
more than one in the chain) does not fit to the Intel StrongARM SA-11x0.
Check the target connection. Check the target CPU type. Check the settings
for /IROFFS= and /CPUPOS= , if there are several parts in the JTAG
chain.
JTAG_SA11x0b.doc